Take Control of the Center and Sides of Already-Mixed Tracks
It’s never too late to fix a “finished” stereo mix—with Center, you can widen or narrow the stereo image, change the balance of sounds panned to the sides or center, raise or lower lead vocals, remix drum loops, minimize “mud,” or bring out the best in bus effects—even when you don’t have access to the multitrack session.
Center distills complex mid-side processing techniques into a convenient, easy-to-use tool. Now you can fine-tune and even “remix” tracks during mastering—from changing vocal levels, to opening up more space for synth pads. If the audio is split between center and sides—Center will give you full control.
Remix Vocal Levels
Most vocals are mixed to center, so changing the center level raises or lowers the vocal compared to the rest of the track. A special Low control preserves the levels of low-frequency sounds (kick, bass) mixed to center.
Improve Your Master’s Stereo Image
A spacious stereo image makes a master more dramatic, and adds clarity by spreading sounds over a wider stereo field. Center expands the stereo image by raising the side levels, and optionally, adding punch and high frequencies.
Remix Drum Loops
Sometimes drum loops have the part you want, but not the mix. Center is almost like remixing the loop’s individual tracks—distribute punch and EQ separately over the center or sides, and change the drum balance.
Shape Your Synths and Pads
Big stereo pads and orchestral sections sound impressive by themselves, but they can obscure sounds mixed to center. No problem—use Center to increase the level in the synth’s sides, and reduce its level in the center.
Drive Your Bus
Use Center to shape the sound going into, or coming out of, bus effects. Create a super-wide reverb sound, while keeping out the kick to avoid mud. Narrow or widen auto-pan effects, or change the image of the overhead mics bus.
Make Vinyl Happy
When mastering for vinyl, it’s crucial to center the low frequencies. Center uses a combination of imaging and equalization to push the low frequencies to center, while maintaining stereo imaging for the highs.
Features
- Separate the center “phantom” channel from the sides
- Widen stereo imaging for more impact and clarity
- “Remix” old mixes when the original multitracks aren’t around
- Change vocal levels in already mixed tracks
- With stereo pads, open up space for sounds mixed to center
- Narrow the low frequencies for vinyl mastering
Description
System Requirements
Waves v15 System Requirements
Mac | Windows |
---|---|
CPU Intel or Silicon Architecture See notes regarding Apple Silicon based processors | CPU X64 compatible Intel or AMD CPU |
Memory Minimum: 8 GB RAM (16 GB recommended) 16 GB free disk space on the system drive | Memory Minimum: 8 GB RAM (16 GB recommended) 16 GB free disk space on the system drive |
Operating System macOS Monterey 12, Ventura 13, Sonoma 14 | Operating System Windows 10 64 bit (21H2) Windows 11 (21H2) |
Screen Resolution Minimum: 1024x768 Recommended: 1280x1024 / 1600x1024 USB displays are not supported as the primary display. | Screen Resolution Minimum: 1024x768 Recommended: 1280x1024 / 1600x1024 |
Exceptions and Notes
Clarity Vx / Pro and Clarity Vx DeReverb / Pro:
|
Waves 15 Supported Hosts
MacApple Silicon Support | Windows |
---|---|
Pro Tools 2023.12, 2024 (AAX Native, Audiosuite) | Pro Tools 2022, 2023 (AAX Native, Audiosuite) |
Ableton Live 12 (VST3) | Ableton Live 12 (VST3) |
Audition 24 (VST3) | Audition 24 (VST3) |
Bitwig Studio 5.1 (VST3) | Bitwig Studio 5.1 (VST3) |
Cakewalk by BandLab 2024 (VST3) | |
Cubase 13 (VST3) | Cubase 13 (VST3) |
DaVinci Resolve 18.5 | DaVinci Resolve 18.5 |
Digital Performer 11 (Audio Units) | |
FL Studio 21 (VST3) | FL Studio 21 (VST3) |
Garage Band 10.4 (Audio Units) | |
Komplete Kontrol 3 (VST3) | Komplete Kontrol3 (VST3) |
Logic Pro X 10.8, 11 (Audio Units) | |
Luna 1.6 (Audio Units) | |
Nuendo 13 (VST3) | Nuendo 13 (VST3) |
OBS Studio 29 (Intel Only) Via StudioVerse, Stereo only | OBS Studio 29 (Intel Only) Via StudioVerse, Stereo only |
Premiere Pro 24 (VST3) | Premiere Pro 24 (VST3) |
Maschine 2 (VST3) | |
Main Stage 3 (Audio Units) | |
Pyramix 14 (VST3) | |
REAPER 7 (VST3) | REAPER 7 (VST3) |
Reason 12.7 (VST3) | Reason 12.7 (VST3) |
Samplitude Pro X8 (VST3) | |
Sequoia 16 (VST3) | |
Studio One Professional 6 (VST3) | Studio One Professional 6 (VST3) |
Waves’ latest version works on newer sub-versions of these DAWs, unless stated otherwise.
Waves plugins comply with the major audio plugin formats (VST3, AU, AAX).
If your DAW is not listed below, but supports VST3, AU or AAX, it should work fine with our software.
Your DAW must be running on an operating system that supports it in order for plugins to work properly. To confirm that your DAW version is supported on your operating system, please refer to your DAW’s website.
Exceptions & Notes:
General:
- These specs are for software version 15.
- V15 supports 64-bit only.
- In hosts that support both VST and VST3 plugins, we highly recommend using only VST3 plugins in new sessions from now on, and migrating plugins in old sessions to VST3.
- With the release of Waves V13 plugins, we announce full official Apple Silicon support for host applications that are themselves Apple Silicon-compatible. We will work to provide official ARM support for more host applications as they become Silicon-compatible. We will update this page with new developments as they are available.
- MIDI Support: The following hosts do not offer MIDI support: Pyramix, Premiere, Audition and OBS.
- MIDI Learn:
Not supported in the following plugins: Scheps Omni Channel 2, MultiMod Rack, CLA MixHub, Abbey Road TG Mastering Chain.
Native Instrument hosts: MIDI learn is not supported in effect plugins if they’re inserted after a virtual instrument plugin in Maschine and Komplete Kontrol.
Logic Pro, MainStage, Digital Performer, Luna: Only certain plugins support MIDI learn. Click here for a full list.
GarageBand: MIDI Learn is supported only with Waves Virtual Instrument plugins. - Mono to Stereo components are not supported in Cakewalk by BandLab, GarageBand and Luna.
- Sidechaining is supported on the following hosts: Pro Tools, Logic Pro, Nuendo, Cubase, Cakewalk by BandLab, Audition, Ableton Live, FL Studio, REAPER, Bitwig Studio, Samplitude, Sequoia and Studio One.
- Demo Mode: Audio mutes are not synced between plug-ins running in Demo Mode, when tracks are set to Input Monitoring and the transport is stopped.
- Surround plugins are supported on the following hosts: Pro Tools, Logic Pro, Digital Performer, Nuendo, Cubase, Audition, Premiere, REAPER, Pyramix and DaVinci Resolve.
- Drag and Drop support: ‘Drag and Drop' of samples and audio files in to CR8 Creative Sampler is possible only on DAWs that support this feature: Ableton Live, Cubase, Nuendo and Studio One.
- GarageBand: The Preset Browser is not available on Intel Mac computers.
- Adobe Premiere on Apple Silicon Macs: While loading plugins / changing parameters, you may experience a slow graphic refresh rate.
- Maschine/ Komplete Kontrol: The following plugins will not function correctly when loaded as VST3 plugins: API-2500, C1 Compressor, dbx160 Compressor / Limiter, H-Comp Hybrid Compressor, Renaissance Compressor, SSL G-Master Bus Compressor, V-Comp. Maschine 2.17.2 and Komplete Kontrol 2.9.2 include a fix for this issue.
- FL Studio: FL Studio 21.1.1.3318 may produce graphics issues on Mac computers with Intel processors.
Solution: Update FL Studio to the latest version (21.0.3.3352 or later). - DaVinci Resolve: Tempo Sync is not supported.
See all exceptions here
Change Log
View All Waves Release Notes here |
---|
All Waves Plugins: Across-the-board software update to V15New Features & Improvements in Waves V15
Bug fixes in all Waves plugins
|