FabFilter Total Bundle -

Product Option

PRIMARY

The Total Bundle is a set of all FabFilter plug-ins at a heavily discounted price!

With this bundle, you get their professional EQ, reverb, compressor, multiband dynamics, limiter, de-esser and gate/expander, creative multiband distortion, delay, filter and synthesizer plug-ins.

Included in the Total Bundle:

FabFilter professional mixing and mastering tools

FabFilter Pro-Q 3

Pro-Q 3 is a high-quality EQ plug-in. Learn more

FabFilter Pro-C 2

Pro-C 2 is a professional compressor plug-in. Learn more

FabFilter Pro-L 2

Pro-L is a feature-packed limiter plug-in for mastering and mixing. Learn more

FabFilter Pro-MB

Pro-MB is a powerful multiband compressor/expander plug-in with all the expert features you need. Learn more

FabFilter Pro-DS

Pro-DS is a highly intelligent and transparent de-essing plug-in. Learn more

FabFilter Pro-G

Pro-G is a highly flexible gate/expander plug-in with advanced side chain options and precise metering. Learn more

FabFilter creative effect and synthesizer plug-ins

FabFilter Saturn

Saturn is a multiband distortion, saturation, and amp modeling plug-in, with lots of modulation options. Learn more

FabFilter Timeless

Timeless 3 is an ultra-flexible tape delay plug-in with time stretching, top-quality filters, and drag-and-drop modulation. Learn more

FabFilter Volcano

Volcano 3 is a powerful filter effect plug-in with state-of-the-art filter technology and endless modulation possibilities. Learn more

FabFilter Twin

Twin 3 is equipped with the best possible analog-modeled oscillators, award-winning filters, and an extensive effects section. Learn more

FabFilter basic plug-ins

FabFilter One

One is a basic synthesizer plug-in with just one oscillator, but with perfectly fine-tuned controls and the best possible sound and filter quality. Learn more

FabFilter Simplon

Simplon is a basic and easy-to-use filter plug-in with two high-quality multi-mode filters and an interactive filter display. Learn more

FabFilter Micro

Micro is the ultimate lightweight filter plug-in with a single high-quality filter including envelope follower modulation. Learn more

Windows

Windows 11, 10, 8, 7, or Vista (32-bit and 64-bit)
VST 2/3 or CLAP host or Pro Tools

Mac OS X

macOS 10.13 or higher (64-bit only)
Audio Units host, CLAP or VST 2/3 host, or Pro Tools
Intel or Apple Silicon processor

All Plug-ins Updated with Bug fixes

Feb 13, 2024

Added support for automatic VST2 to VST3 migration: this enables Cubase 13 on Apple Silicon computers to load existing sessions with VST2 plug-in instances, replacing them with VST3 ones. (Note: this is a relatively new feature in VST3 and not all hosts support it.)
Fixed a bug that could cause Twin 3 and Pro-R 2 to lose preset favorites information after a minor update.
Fixed an issue in the CLAP plug-ins that could cause some controls to not work correctly (e.g. the solo button in Pro-Q 3).
Minor bug fixes and improvements.

Update: All FabFilter Plugins Updated, Pro-Q 3 & Pro-L 2 get Dolby Atmos AAX support

July 5, 2023 – See Update information on our news blog

All Plug-ins Updated – AAX Apple Silicon support

March 21, 2023

Added Apple Silicon support for all AAX plug-ins.
All Pro and Creative plug-ins now support interface scaling. The resize button in the bottom right corner of the interface now offers a Scaling submenu, with options to increase or decrease the scale of the entire interface, e.g. 125%, 150%, etc.
Reduced CPU spikes on changing oversampling or high quality mode in Pro and Creative plug-ins.
Added a right-click shortcut menu for the preset button, with Save and Save As options. In Twin 3, this also lets you mark a preset as favorite.
Added support for MIDI program changes in the VST3 plug-ins.
Timeless 3, Volcano 3, Twin 3 and Saturn 2: Added Show Source Flow option, available via the Add Source ‘+’ button menu.
Timeless 3, Volcano 3, Twin 3 and Saturn 2: Added Auto-Collapse Sources option, available via the Add Source ‘+’ button menu. When enabled, expanding one source interface will automatically collapse the others (the default behavior). When disabled, multiple source interfaces can be expanded at the same time.
Pro-DS and Pro-G: Added support for different interface sizes and Full Screen mode.
Pro-G: Added density spectrum visualization in the side chain filter controller, similar to how Pro-DS shows this.
Pro-L 2: Added Auto-Reset option for loudness metering, available as a toggle option in the Loudness Time Scale menu. When enabled, loudness metering and clipping will be reset every time playback starts in the DAW.
Twin 3: Fixed a bug which caused the main Frequency Offset parameter to be ignored for filters with panning and non-modulated Filter Frequency.
Twin 3: Redesigned options icon in the preset browser to make it more discoverable.
Volcano 3: Fixed a bug that could cause possible clicks or noise when modulating filter peak values around zero.
Volcano 3: Fixed issue where text entry for the peak value in the parameter value display would change frequency when piano display was enabled.
Volcano 3: Fixed an issue in the mono version of the plug-in where filters that were removed in the interface could still remain in effect.
Twin 3: The Arpeggiator Lock parameter is now always disabled for new instances of the plug-in.
Small bug fixes and improvements.

All plug-ins updated, Dolby Atmos support for Pro-Q 3 and Pro-L 2

Dec 13, 2021

All FabFilter plug-ins have been updated with bug fixes and improvements, including immersive audio support in Pro-Q 3 and Pro-L 2. This update is free for existing customers and we recommend everyone to update to the latest plug-in versions. So what’s new?

Pro-Q 3, Pro-L 2:

Extended support for immersive/3D audio channel layouts, now up to Dolby Atmos 9.1.6. Note: AAX only supports layouts up to Dolby Atmos 7.1.2.

Pro-Q 3:

In the surround version of the plug-in, it is now possible to let a curve affect all three front speakers (L/C/R).
The interface will now clearly show that it’s in-band solo mode when loading a session that was accidentally saved with Band Solo enabled, or when toggling solo via a Pro Tools control surface.
The interface now restores the previous zoom level when closing and reopening.
The interface now remembers the previous manual threshold value for each band when you switch between auto and manual mode.
Added Use Accessible Colors item to the Help menu, toggling to a brighter color for spectrum collisions.

All plug-ins:

Improved rotational drag mode for knobs to avoid unexpected sudden changes.
For newly installed plug-ins on Mac, factory presets will now be saved in the user’s Documents folder, in FabFilter/Presets.
Fixed issues with text input for controls when running in Pro Tools, on macOS Big Sur and Monterey.
Improved Full-Screen mode on Mac when using multiple monitors: the menu bar and the dock will now remain visible on other monitors. Fixed an issue with Timeless 3 and Volcano 3 where dialogs (e.g. Save As for presets) would not show up in Full-Screen mode. The camera area on a 16″ MacBook Pro will not overlap the full-screen area anymore.
Fixed a bug that caused keyboard shortcuts (e.g. the space bar) not to work in Reaper on Windows after using the mouse wheel and not moving the mouse.
The Windows installers now remember the VST2 folder location that was last used.
Pro-L 2: Fixed a small issue with higher oversampling rates (8x and more) wherein some very specific cases, True Peak limiting could introduce a bit more distortion than needed.
Timeless 3: Fixed an issue that could cause a crash when running at very high sample rates, which also caused VST3 validation in Digital Performer to fail.
Volcano 3: Fixed a possible crash when modulating curves routed in parallel.
Small bug fixes and improvements.

Updated February 20, 2018

All plug-ins:

Fixed possible crashes in Logic Pro X, which occasionally tries to initialize plug-ins with invalid/uninitialized buffers.
Fixed possible crash in Nuendo 7 on macOS when closing a plugin.
Fixed issues with key stroke stealing on Windows when using the Avid S6 control surface.
Fixed incorrect appearance of plug-in interfaces in Live 10 in High DPI mode.
The VST 2.4 plug-in will now automatically adapt its channel layout to match the audio/track it is placed on. Note that the separate “(Mono)” version of the plug-ins are still included for backwards compatibility.
Fixed a bug that could cause a crash when moving the mouse over the right edge of a menu with icons.
Small bug fixes and improvements.

FabFilter Total Bundle

Included in the Total Bundle: